Blichmann BrewEasy Gas (10 Gallon)
The BrewEasy™ is a revolutionary new ultra-compact and economical all grain brewing system.
This patent-pending system and process utilizes a two kettle recirculation infusion mash system called the Kettle-RIMS™ or K-RIMS™ process for short.
This system is very simple to use and is a very approachable way to transition from extract brewing into all grain brewing.
The BrewEasy™ provides all the simplicity of a traditional no-rinse brew-in-a-bag (BIAB) system, but offers the ramping capability of a traditional RIMS system, eliminates the messy and unsafe lifting of hot grains, and provides better wort clarity than BIAB.
This Turnkey Kit includes all of the necessary equipment to produce 10 gallon batches of beer from the BrewEasy™.
Mash in the upper vessel, while using the lower to recirculate wort and raise mash temps as necessary.
Recirculation flow rate is controlled by included orifices, allowing for 6 flow settings from 0.5 - 2.0 gpm.
After conversion, simply open your Mash Tun valve, letting your wort drain into your Boil Kettle, at which point you're ready to boil and should be getting your hops ready!
1x 15 gal BoilerMaker™ Kettle and False Bottom (upper Mash Tun)
1x 20 gal BoilerMaker™ Boil Kettle (lower Boil Kettle)
1x Blichmann TopTier™ Burner
1x Blichmann Tower of Power™ Control Module - Gas Fired
1x Blichmann Tower of Power™ LTE Stand - With Pump
1x BrewEasy™ Adapter Lid Kit - 10 gallon
The BrewEasy™ system eliminates the need for sparging, simplifying the process and saving time.
Efficient, fast, and it lets you BrewEasy™!
How does it all work?
This two kettle K-RIMS™ system eliminates the hot liquor tank of a traditional three-tier system as well as the time consuming and somewhat complicated sparging process.
While a three-tier system is still the most versatile and efficient, the BrewEasy™ offers improved efficiency over traditional no-rinse BIAB while eliminating the lifting of hot grains.
The recirculation through the mash bed generates super clear wort.
Simply start with ALL of your brewing water (liquor) for your brew day and place about half in the lower kettle (boil kettle) and the remainder in the upper kettle (mash tun).
Set your AutoSparge™, turn on the pump and add heat.
The liquor will recirculate from the boil kettle, into the mash tun, and back into the boil kettle.
When the liquor has reached the dough in temperature, turn off the pump and add your malt.
Ramping through several temperature rests is as easy as turning on the burner!
When you're through your mash, simply turn off the pump and let all the wort from your mash tun drain into your boil kettle and boil as normal.
It's as simple as that! Looking for automation? Add in the TOWER of POWER™ temperature control module and convenient TOWER LTE™ stand!
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.